To use the batch label printing feature you will require the DYMO LabelWriter 450 or 550. For setup and how to use instructions please refer to the Label printer section on the Hardware setup page.

To view all product barcodes, go to the Barcodes and labels view within the Products area. A list of all product variants are displayed with an assigned barcode, grouped alphabetically by supplier (A-Z).

Tap All stores to filter by a specific store, or All suppliers to filter by a specific supplier. Search for a product by brand, SKU, product name and category, the Brand, SKU, Name and Category columns are also sortable. The icon indicates that the barcode has been auto-generated.

To change a barcode, filter the list to the product you wish to change. Tap the barcode input and the existing barcode will be cleared, either scan a new barcode into the field or manually enter it.

To print a single barcode or batch print barcodes, select the product variants you wish to print labels for.

For batch printing tap the Select all checkbox in the table header to select all 20 products variants for that page, repeat the process on each page (20 shown on each page). A maximum of 100 labels can be printed at one time.

By default 1 barcode label is printed per product variant, to increase/decrease the quantity, update the Qty to print field for each product variant. Once the products have been selected tap Print barcode labels.

A panel displays a preview of each label to be printed with the DYMO LabelWriter 450 or 550 selected as the printer and the Standard 57x32 selected as the label template.

There are 2 template options; the Standard 57x32 prints the store logo, the w/o logo 57x32 prints without the store logo. Tap Print within the preview panel to print the labels.

If the label printer is not connected or powered on, the Print button will be disabled and the label previews will not be generated.

Label template: